Showing posts with label how to change a watch battery. Show all posts
Showing posts with label how to change a watch battery. Show all posts

Saturday, October 31, 2026

How to Change A Battery on an Ed Hardy Watch

With the Halloween holiday upon me, I decided to bring two or my Ed Hardy watches back from the dead. Both have creepy skulls in relief on their dials. It's just the right amount of creepiness for the day.

Step 1: Open the Case

I used the small watch back opening blade from my Walmart watch repair kit. There is a very small notch between case and caseback where it meets the case. That's where you stick the blade and pop the case off.

But, in truth, I could have used any pocket knife with a sturdy blade that can be used as a lever.


Step 2: Determine the battery needed

I removed the white plastic spacer by gently lifting up out of the watch. I could then see that both of these watches use 377/SR626SW watch batteries. You can find them easily on this blog's battery page.

Step 3: Remove the dead batteries


Next I gently pry out the old battery while being careful not to bend, fold, or mutilate the small clips that overlap the edge of the battery. Sometimes you can get the battery on an angle and just pop or push it out.


Step 4:  Insert the new battery.


Inserting a new battery is the reverse procedure. I just work gently and press the battery flat when I'm done. I peak at the dial to make sure the second hand is moving.


Step 5: Press the Plastic Retention Back  Ring In


To hold the works together and keep the dial aligned with the case and movement.

Notice there is a slot in the plastic ring that is open for the crown stem that runs from the crown into the movement.

Step 5: Press the case back on.

You'll see a small indent of the caseback to give space for the watch stem. But, this watch is so thick, it doesn't really come into play. However, I line it up anyway.

Next, I break out my Watch Case Press,  select the nylon die that fits the bezel of the watch and press the case back on. You can purchase an inexpensive watch case press here on Amazon using my affiliate link. It's an easy process.


If you like watches with skull designs, come visit the collection on my Amazon storefront.


Saturday, June 27, 2026

Watch Workshop: Changing the battery in a Nautica NST-15 watch

 I recently revived my old Nautica NST-15 watch with a new battery. The watch has a bright yellow strap that is perfect for summer. It also has an innovative retrograde calendar that runs  counterclockwise along a date track on the interior portion of the dial. It's pretty cool, but I have to set it properly.

Nautica NST-15 watch for men

Removing the Nautica NST-15 Caseback

Removing the caseback was easy using a caseback removal tool. I have a tool like the one shown below.  It's available via my Amazon affiliate link here. You just adjust the blue tool to fit the indents on the case and unscrew it in a counterclockwise direction.

Wellfit Watch Back Removal Tool (Amazon photo)

The caseback reveals that the watch is made for Nautica by Timex. It's a minor factoid that I'll remember.

Nautica NST-15 Caseback reveals the manufacturer.

Replacing the Watch Battery

The watch is powered by a Miyota 2353 No Jewel Movement that has an accuracy of +/- 20 seconds per month. It uses a standard 377 (SR626SW) battery that is pretty easy to replace. For replacement batteries, check out my battery selection page.

Miyota 2353 No Jewel Movement in a Nautica NST-15 watch

When changing the battery there are a couple of metal pieces that can ever so slightly be pushed aside to release the battery. I think I was able to slightly move the piece on the right that lies atop the battery. The tiniest bit of movement was sufficient.

The battery secured in the Miyota 2353 Movement

More on this watch

For more on this watch, check out my original Nautica NST-15 review post here. While this model has disappeared from Amazon in the US, you can still find it on various watch sites around the world. I'm glad to have it back in the rotation.